Tumbler vibrating screen consists of a base, shock absorber spring, screen frame, screen mesh, vibrating motor, etc. In order to improve the service life of the equipment and reduce the maintenance cost of the daily use equipment, it is necessary to clean the screen and provide you with five Tumbler vibrating screen cleaning method.
1. When cleaning the extension of the tumbler vibrating screen, the water temperature should be controlled between 30 and 50°C. This temperature has a good cleaning effect.
2. When cleaning the tumbler vibrating screen, a high-viscosity cleaning fluid should be used. The higher the viscosity of the cleaning fluid, the higher the gas content in the cleaning fluid, and the better the cleaning effect.
3. When the screen swings, the sound intensity should be controlled at about 1W-2W/mm2, which has a greater impact on the cleaning effect.
4. Generally, the lower the frequency, the more obvious the cavitation effect, but the noise is relatively high. It is more suitable for objects with relatively flat surfaces. The higher the frequency, the worse the cavitation effect, but the lower the noise. Objects and electronic crystals are more effective in blind microvias.
5. When the screen is thoroughly screened, the fine powder may be hidden in every corner of the screen machine. During the cleaning process, attention should be paid to cleaning and there should be no small corners