1. It is recommended to make a support frame to hang the spare screen surface.
2. Check the sieve compression device every shift, if there is any looseness, it should be compressed.
3. Check the sealing strip frequently and replace it in time if it is found to be worn or defective.
4. The sieve grid should be taken out frequently, and regularly check whether the sieve surface is damaged or uneven, whether the sieve hole is blocked, etc.
5. Check whether the connection of the feeding box is loose or not every shift. If the gap becomes larger, it will cause a collision and cause the equipment to rupture.
6. Although the vibrating screen does not need lubricating oil, it still needs to be overhauled once a year, replacing the liner, and trimming the two screen surfaces. The vibration motor should be removed for inspection, and the motor bearing should be replaced with oil. If the bearing is damaged, it should be replaced
7. Check the sieve body support device every shift to observe whether the hollow rubber pad has obvious deformation or degumming. When the rubber pad is damaged or excessively flattened, two hollow rubber pads should be replaced at the same time.