Vibrating screen is a widely used screening equipment. The fracture of the outlet of the vibrating screen is generally composed of two factors. First, the strength of the outlet of the vibrating screen is not enough. For example, some manufacturers use 4 mm plate for the frame of the vibrating screen, while the outlet only uses 2 mm plate, so the cost is reduced. There is no problem with the smaller type for a while. If the size of the vibrating screen is too large or the amount of material is too large, it is easy to cause the rupture of the outlet.
Because the vibrating screen is generally manufactured non-standard, the customer's requirements are different in size. Some require the outlet to be extended forward or downward. In this way, the outlet will break a little more. If it is first designed, the thickness of the plate can be strengthened or the reinforcement can be strengthened. If it is accidental fracture, material quality can be checked. In addition, check whether the parameters of the shaker are correct.
Moreover, in the process of feeding, we should avoid overfeeding the vibrating screen at one time, and the screen can be basically fully utilized. Excessive feeding not only affects the screening effect, but also the screening material can not be discharged through the outlet in time. Excessive weight backlog will also cause the rupture of the outlet of the vibrating screen.