Reasons for the small amplitude of tumbler screens:
1. Screen: Install the net or turn on the screen to make the amplitude smaller without tightening the rotating screen.
2. Resonance: The vibration of the screen vibration motor or the screen frame is damaged or broken, resulting in frequency shift and small amplitude.
3. Bouncing ball: In the screening of finer materials, the screen usually swings, and a bouncing ball device needs to be added at the bottom. The bouncing ball and screen shot can promote the material passing through the net. Some users mistakenly believe that the amplitude is small and the production efficiency is low.
Tumbler screens have a small amplitude solution:
1. Screen problem: You can manually check whether the screen is tight. If there is no tension or glue opening, the screen should be removed from the new stretched screen.
2. Resonance problem: You can check the motor or screen frame. If there is a crack, stop it immediately and contact the manufacturer for repair.
3. The punching plate device is added to the lower part of the screen. The bouncing ball and rubber ring are placed on top. The bouncing ball can be selected from 25mm-30mm type. In addition, when the user purchases the vibrating screen for the first time, the manufacturer should increase the number of materials according to the material requirements. The bouncing ball device prevents the user from adding more trouble.