The three-dimensional rotary vibrating screen is a fine powder screening machine with low noise, high efficiency, and a wide range of applications. It is welcomed by users in terms of use. In the actual use of the vibrating screen, due to various reasons, the vibrating screen may have uneven discharge, so how to avoid this problem?
1. Fix the grid
During the operation of the three-dimensional rotary vibrating screen, we must ensure the stability of the grid frame as much as possible. If the grid frame is not fixed well, the screen box will shake, which will cause uneven discharge of the screened materials.
2. Install the screen correctly
When installing the screen for the rotary vibrating screen, we must operate in accordance with specific regulations. The screen should be tightened when crimping the edge of the screen. If the screen is loose and the tension is not enough, the screening efficiency will be affected. The width of the screen should be consistent with the width of the grid. The length should be about 50-70mm longer than the length of the grid, not less than 50mm. In addition, remember to deepen the screen at the end of the grid into the corresponding discharge port. , Otherwise there will be mixing phenomenon.
3. The steering of the motor
Under normal circumstances, the motor steering has been set before the screen machine leaves the factory. During the actual installation process, technicians will follow to eliminate basic faults.
4. The delivery of materials must meet the technical requirements
We have to choose different types of machines and screens of different specifications for different materials. When purchasing a machine, you must first consult an engineer, choose a model that suits you, and put materials in accordance with the instructions of the technicians.