Because the shaker is non-standard equipment, so most of them are customized according to the customer's functional requirements. Although technical testing will be carried out when they leave the factory, in general, we recommend that customers test the newly distributed shaker equipment, mainly to check whether the performance indicators can meet the customer's needs. Users can carry out multi-directional testing under the demand environment as far as possible. In order to ensure that the vibration screen equipment can meet the requirements. It is important to test the equipment of vibrating screen.
In this paper, linear vibration screen equipment as an example, to the vibration screen test machine operation sequence. Firstly, the foot of the screen machine must be in a horizontal position, fix the foot bolt properly, check whether the foot bolt of the motor is tightened, open the protective cover at both ends of the motor, turn on the power supply, and try to see the direction of the motor rotation at the power point. The two motors must be running relatively, and then check the exciting force. The exciting force of the general linear screen is between 5mm-10mm, if the exciting force is too large or if the exciting force is too large. It is too small to adjust the angle between the eccentric blocks at both ends of the motor. The larger the angle, the smaller the exciting force. Normally, only the eccentric blocks at both ends of the motor are adjusted, and the direction and angle of the adjustment of the eccentric blocks at both ends must be the same.