screening machine
The design of the rocking screen is a high-efficiency screening machine specially designed to meet the needs of large-volume, high-density screening manufacturers. The simplest screening is to screen both hands with both eyes. The rocking and sieving machine is the mechanical simulation of this. It is the most effective simulation of the effective principle of artificial sieving movement (screening accuracy, efficiency, and screen life are 5-10 times that of conventional circular screen). With ultra-fine range of powder and particulate materials, it is especially suitable for materials that are difficult to handle.
Characteristics
Up to 5 times the output per unit area; accurate to 6 levels of separation, screening efficiency of up to 90% -95%; using silicone rubber balls, ultrasonic and other efficient cleaning system system, the screen hole will not block. Closed dust removal, safe operation; acceleration is 4.5 times lower than vibrating screen, the life of screening parts is improved and maintenance is reduced; noise is <75 dB. Optimize the balance of the balance and the dynamic load of the foundation is low.
Structural principle
★ The basic rotary motion is similar to manual screening. The eccentricity is adjustable from 25 to 40mm, and the low-speed V-belt drive is adjustable from 120 to 360rpm
★The dwell time of each product can be adjusted by the radial and chamfer angles of the rocking screen towards the drive axis
★ So build a level and throw a three-dimensional rollover movement. The material is uniformly dispersed from the center to the outer edge on the entire screen surface, thereby propagating in the axial direction by a spiral motion. The fine particles complete the entire screening process.
★The horizontal and vertical accelerations increase with the movement of the particles, and the particles close to the mesh size are successfully separated; the larger particles are transported to the outlet, and the outlet is controlled by an adjustable guide, which is controlled Another factor in material residence time.
★ This process is repeated between each sieve layer.
Applicable industry
Chemicals, food and spices, plastics, mining, pharmaceuticals, wood and plywood, metallurgy, rubber, feed, fertilizer, sugar and salt, recycling industry