The position and mode of vibration screen transmission are exquisite, which is mainly based on the principle of vibration screen transmission.
The main principle of vibration screen transmission: The driving guide plate of the vibrating screen mainly acts as the hub of the transmission of the vibration force in the operation of the vibrating screen. Through the oblique upward direction of transmission, the synthesized exciting force is transmitted to the whole screen surface, forcing the material on the screen surface to make a jump forward motion.
The installation of the central position of the transmission plate mainly affects the distance of material operation. Reasonable calculation of the center point must meet the requirements of the length of the vibrating screen. Installation angle of vibration motor is the main factor that decides the running height and speed of material.
Reasonable installation angle is the standard of material screening permeability. After the installation of vibration motor is biased, it will cause the material running for a certain distance, the speed will be reduced, and the retention phenomenon will also reduce the service life of the screen.
Cautions for motor installation of vibrating screen: The bigger the angle between motors, the faster the material runs and the lower the amplitude. It is suitable for conveying and using. If the angle is too small, the direction of transmission will be changed, and the material will not advance or be very slow.
These two main factors should be paid attention to when making self-made vibrating screen. Of course, such as structure, screen installation and so on can not be ignored.