Things to pay attention to when the vibrating screen machine is turned on
The rocking screen works by the reciprocating rotary vibration generated by the vibrator excitation. The upper rotating weight of the vibrator causes a plane to oscillate the surface of the screen, while the lower rotating weight causes the screen surface to produce a cone-shaped rotating vibration. The combined effect of the vibrating effect causes a complex-rotating vibration of the screen surface. The vibrating screening machine has high performance, light weight, complete and diverse series, and many layers of superior performance.
Here we explain what to pay attention to when the vibrating screen machine is turned on:
1. Turn on the device for 3~5 minutes and check if the steering meets the requirements.
2. Whether there is abnormal sound, whether the vibration is stable, and whether the running track meets the operation requirements.
3. After ensuring that the equipment is idling normally, it is then fed for screening.
4. Check the discharge condition of the vibrating screening machine regularly during operation. If there is any blockage, it should be cleared in time.
5. Check whether the screen surface fabric is uniform. If necessary, stop the machine for adjustment. Continue to produce after meeting the requirements.
6. When abnormal noise, abnormal vibration or vibration is too severe, stop the feeding and stop the feeding immediately, check and adjust the counterweight and excitation device, and restart the production after the fault is removed.
7. When the electrical equipment is automatically tripped, if the cause is unknown, it is forbidden to start