Rotary vibrating screen self-test manual
As we all know, the ternary vibrating screen is a high-precision screening equipment. It is highly praised by users because of its low noise, high efficiency, fully enclosed structure and fast ring network. If there is a problem with poor discharge on the screen when using a vibrating screen to screen the material, our technicians give the following solutions.
(a) First check the screen
1) The principle of screening of the vibrating screen is that the material is subjected to three-dimensional movement on the screen surface, so the screen may be loose, uneven, sinking, etc., which may cause poor discharge.
2) Check if the screening net is tight? Is there a problem of bulging or discounting locally?
3) Check if the screen surface of the sub-mesh is loose or sinking? Is the parent network damaged?
(b) Check the T-type weight at both ends of the shock source
1) The vibrating screen is mechanically generated by the T-type weight at both ends of the shock source, thereby changing the direction of the force of the material by adjusting the angle of the T-weight.
2) Check if the T-type weight at both ends of the motor is loose? Under normal circumstances, the T-type weight is stuck on the motor or the exciter shaft by a circlip. When it is loose, there is no problem that the discharge is not smooth when there is no force or the direction of the resultant force is unstable.
(c) Precautions for the operation of the vibrating screen
1) Fasten the fasteners of the equipment regularly every working day, especially the bundle bolts.
2) The assembly of the screen is very important, so every time you install the screen, pay attention to the instructions.
3) The mother net is the plane that supports the screen mesh and the transmission force, so it is necessary to regularly check whether it is damaged or the sinking of the screen surface, and promptly give us feedback to repair or purchase inventory parts.
4) The vibration motor or vibration exciter is the source of the shock of the equipment. Pay attention to the regular inspection and add 3# grease.