Installation Notes:
1. Remove the transportation support. Since the base of the screen and the screen frame are connected by springs, the upper half of the screen is firmly supported during transportation. After entering the installation site, the transportation support should be removed, and it is strictly forbidden to run without the support!!!
2. Installation is to place the screen machine on a level foundation. If the foundation is not laid, a vibration-proof rubber sheet should be laid between the workbench and the machine base.
3. The vibrating motor and the cable in the sieve machine are subjected to severe vibration, and should be connected to a standard ground wire for safety.
4. Each layer of the vibrating screen can be rotated 360°, loosen the locking ring bolts, adjust the required position of the discharge nozzle of each layer, and then remember to tighten the locking ring bolts. The tightening method is to tighten the nut, and at the same time hammer the outer periphery of the locking ring with a hardwood stick or a rubber hammer until the hammering sound is not loosened. The filter type screening equipment designed to prevent liquid splashing is designed to prevent liquid splashing. Water filtration, pulp filtration and other industries have a wide range of applications.
