Gyratory vibrating screen has the advantages of reasonable design, simple structure, stable operation, fully enclosed structure, dust-free, anti-blocking hole, anti-sticking net and so on. Especially for urea with strong hygroscopicity, high viscosity, easy to block holes and sticky mesh, the screening is more obvious.
Due to the principle of plane rotary motion, the dynamic-to-static ratio of the equipment and the basic dynamic load are effectively reduced. Operate to check whether the components are normal and whether the fasteners are loose, especially the vibration motor;
During the operation of the gyratory vibrating screen, if any abnormal sound is found, the machine should be shut down for inspection immediately, and it should not be put into operation before the failure is resolved;
The vibration motor accumulates within 100 hours, which is the initial operation period. During this period, the anchor bolts should be tightened once per shift. After each shift, the machine can be shut down after confirming that the material in the machine is empty to prevent material deposits from clogging the screen holes.
Maintenance: Regular inspection proposes to clean the screen surface and check whether the screen mesh is broken or broken;
After running for about 200 hours, the bearings of the vibration motor should be lubricated, and a grease gun should be used to add lubricating oil to the bearings.