As a kind of mechanical equipment, it can not be separated from the power supply, especially the motor in the equipment. It is an important part of the equipment, and it also accounts for a higher total cost of the equipment. So once the leakage of electricity, the service life of the motor will be shortened, and the operation of the whole equipment will be caused seriously. Today, Xiaobian will take you together to see how to deal with the leakage fault of the vibration motor in the vibration screen, for users'reference.
The first possibility of leakage is the reason why the motor is damped. We all know that once the electrical fittings are damped, it will affect its use effect. The damped motor can be solved by drying, but if the moisture inside is too large, it needs to be replaced to avoid reluctant use and damage to other fittings.
The second possibility of leakage is the motor power supply, just like the electrical equipment used in our family, the power switch position is also important. Sometimes the hand with water touches the power supply, causing the water in the power supply, leakage, and may also be the ground wire and power line fault in the power supply, which may lead to leakage of the motor, so we must pay attention to the details in peacetime.
The third possibility of leakage is that the insulating skin of the lead-out wire in the motor is aging, and the aging circuit is prone to failure. It is necessary to wrap the insulating skin again to solve the problem, or replace the new lead-out wire to avoid causing fire. Moreover, dust and dirt should be cleaned regularly on the motor wiring board, too dirty will also cause leakage failure.