(1) Always keep the hydraulic system clean and stable, and prevent other sundries from entering and causing malfunctions.
(2) The filter cloth should be kept flat during the filter press process, no wrinkles are allowed, and the filter cloth can be cleaned according to the situation.
(3) Check the filter cloth frequently. If there is any leakage, replace and repair it in time. When sewing the filter cloth, cut off the leaks and then sew it to prevent overlap on the sealing surface and increase the thickness of the filter cloth.
(4) Regularly inject grease into the bearings, pour oil on the transmission chain and track of the equipment, and remove dirt.
(5) Since the hydraulic station in the hydraulic system is a confined space, the hydraulic oil will become less and less after being used for a long time. When the hydraulic oil cannot be less, the oil pump will run idling, which may give the motor to Burn out, causing damage to the hydraulic system. Therefore, it is necessary to regularly supplement and change oil to the hydraulic system, and clean the oil filter to ensure the normal operation of the hydraulic system.
(6) When the oil temperature of the hydraulic system is lower than 10℃, the heater can be used to increase the oil temperature.
(7) Use the equipment correctly, especially do not open the filter press on an empty stomach, otherwise, the filter plate is easily deformed and damaged, and even paralysis of the equipment.
(8) Filter cloth is an indispensable part of machinery and equipment. When drying after cleaning, it must not be too dry.